Catia Temel Eğitimi


Video Eğitim

Kurs Detayları

11 Saat eğitim
158 Video
29836 incelenme

Açıklama

Catia tasarım mantığı ile katı modelleme çizimlerini içeren settir. Teknik resim, montaj ve daha ileri modüllere geçmeden önce başlangıç eğitimini almanı önerilir.

İçinde ne var?
Catia giriş 2D Modelleme (Sketch) 3D Modelleme (Part Design)
Dersler:

Aşağıdaki videoları izleyebilmek için giriş yapmalısınız.

Giriş Yap
Ücretsiz
  • Catia Giriş Izle
  • Arayüz Düzenleme Izle
  • Mouse Kullanımı Izle
  • Klavye kısayolları Izle
  • Catia dosya tipleri Izle
  • Save management Izle
  • Unsur Agaci Izle
  • Compass Izle
  • 2D Çizime giriş
  • Sketch tools, grid, snap Izle
  • Construction-Standart Element
  • Geometrical constraint
  • Dimensional constraint Izle
  • Constraint defined 1
  • Constraint 1
  • Contact constraint
  • Fix together
  • Auto constraint
  • Edit multi constraint Izle
  • Profile
  • Circle
  • Predefined profile
  • Spline
  • Ellipse
  • Line
  • Point
  • Corner
  • Chamfer
  • Trim
  • Break
  • Quick trim
  • Close arc, complement
  • Symmetry
  • Mirror Izle
  • Translate
  • Rotate
  • Offset
  • Scale
  • Edit formula
  • Grafik özellikleri Izle
  • Measure unit
  • User selection filter
  • Sketch solving status Izle
  • Sketch analysis
  • View
  • View mode
  • View hide show
  • Pad ile katılama
  • Pad-Up to next
  • Pad-Up to last
  • Pad-Up to plane
  • Pad-Up to surface
  • Pad-More
  • Drafted filleted pad
  • Multi pad
  • Pocket
  • Drafted filleted pocket
  • Multi pocket
  • Pad-pockets from surfaces
  • Shaft
  • Groove
  • Hole extension
  • Hole type
  • Hole thread definition
  • Rib
  • Slot
  • Stiffner
  • Solid Combine
  • Reference element-line-point point Izle
  • Reference element-line-point direction
  • Reference element-line-angle to curve
  • Reference element-line-tangent to curve
  • Ref. element-line-normal to surface
  • Ref. element-line-Bisecting
  • Ref. element-plane-offset from plane
  • Ref. element-plane-parallel to point
  • Ref. element-plane-angle to plane
  • Ref. element-plane-through 3 points
  • Ref. element-plane-through 2 lines
  • Ref. element-plane-through point and line
  • Ref. element-plane-through planar curve
  • Ref. element-plane-normal to curve
  • Ref. element-plane-tangent to surface
  • Ref. element-plane-equation
  • Ref. element-plane-mean
  • Ref. element-point-coordinates
  • Ref. element-point-on curve
  • Ref. element-point-on plane
  • Ref. element-point-on surface
  • Ref. element-point-circle sphere
  • Ref. element-point-tangent to curve
  • Ref. element-point-between
  • Project 3D elements
  • Intersect 3D elements
  • Project 3D silhouette edges
  • Multi section benzer profiller
  • Multi section solid çoklu çizim
  • Multi section guide
  • Multi section solid farklı profiller
  • Multi section solid relimitation
  • Remove multi sections solid
  • Visualization cut part by sketch plane.
  • Visualization Visu3D
  • Visualization diğer
  • Edge fillet
  • Edge fillet more
  • Variable radius fillet
  • Chordal fillet
  • Face fillet
  • Tritangent fillet
  • Chamfer
  • Draft angle
  • Draft reflect line
  • Variable angle draft
  • Shell
  • Thickness
  • Thread tap
  • Remove face
  • Replace face
  • Translation
  • Rotation
  • Symmetry
  • Axis to axis
  • Mirror
  • Rectangular pattern
  • User pattern
  • Scaling
  • Affinity
  • Surface based features-Split
  • Surface based features-Thick surface
  • Surface based features-Close surface
  • Surface based features-Sew surface
  • Body ekleme
  • Body geçişi 1
  • Body geçişi 2
  • Define in work object
  • Boolean giriş
  • Boolean-Assemble Add
  • Boolean-Remove
  • Boolean-Intersect
  • Boolean-Union trim
  • Boolean-Remove lump
  • Renk atma
  • Şeffaflık
  • Malzeme atama
  • Anotasyon yazısı
  • Measure between
  • Measure item
  • Measure inertia
  • Positioned sketch
  • Dinamik kesit
  • Akıllı arama
  • Compass
  • Capture
  • Render
  • Dizayn tablosu
  • Catalog document
  • Formulasyon

Satın Al

Önerilen Kurslar